A beverage producer draws its process water from its own well. During a dry summer, the authority limits extraction, bottling runs on two shifts only, and two large retail customers receive their goods late. The well did not appear in the asset register, and the continuity plan had no second water source either. Environmental assets are the resources operations depend on and the impacts the organization has to answer for.
Energy, water and land seem a given until they become scarce. On the other side are emissions, waste and recycling, which organizations increasingly report on and which come with conditions attached. Asset category AC10 brings both together so that you can name these assets in the asset register, assign them to a responsible person and rate them by their protection needs.
What belongs to it?
The catalogue splits the category into two asset classes. One describes what the organization takes from the environment, the other what it gives back to it.
- Natural resources. Water supply, whether through the public mains, rainwater harvesting or a well of its own, energy sources such as grid power, on-site solar panels or natural gas for heating, and land, from the factory site through reserve plots to agricultural land for the supply chain.
- Environmental impact. The carbon footprint with emission reports, product assessments and data on employee commuting, waste management with separate collection, disposal of hazardous waste and recycling of e-waste, and recycling systems such as collection bins, sorting lines and take-back schemes for batteries and electronics.
The category is one of the smallest in the catalogue. Its weight comes from its links: a power failure hits hardware, buildings and processes all at once.
Why the category matters
ISO/IEC 27005 distinguishes primary assets, meaning information and processes with value of their own, from supporting assets on which these business assets rest. The catalogue lists all six asset types as supporting assets: resources keep processes and systems running, and data on environmental impact is the basis for reports and permits. Their protection needs follow from what depends on them.
In clause 6.4.3.2, the standard explicitly names adverse effects on the environment among the criteria for rating consequences. Since an amendment published in 2024, ISO 27001 also requires organizations to check, as part of their context, whether climate change matters to them. For the ISMS this means that heatwaves, heavy rain, water shortages and rising energy prices belong in the risk assessment, and the assets in this category make them tangible.
Typical threats
- G 0.8 Failure or Disruption of the Power Supply: grid outages, voltage fluctuations, supply shortages.
- G 0.10 Failure or Disruption of Supply Networks: water, gas or district heating are unavailable or only partly available.
- G 0.2 Unfavourable Climatic Conditions: heat overloads the cooling, cold or humidity damages devices and goods.
- G 0.5 Natural Disasters and G 0.3 Water: floods, droughts or storms at the site and along supply routes.
- G 0.4 Contamination, Dust, Corrosion: dust from production or construction sites, polluted air in the technical room.
- G 0.29 Violation of Laws or Regulations: breached conditions of an environmental permit, flawed reports.
- G 0.19 Disclosure of Sensitive Information: data on devices that end up in the e-waste stream without being wiped.
In practice: recording assets in the asset register
Record resources per site. Create electricity, water, gas and land as assets and assign category, class and type (→ Asset Register in the Starter Kit). Link them to the sites and the processes that need them.
Check backup supplies. Record whether there is emergency power, an uninterruptible power supply or a second water source, and how long it lasts. The → Business Continuity Policy sets the frame for such scenarios.
Protect environmental data. If you report emissions or waste volumes, the data sources and the people allowed to change them belong in the register. Traceable figures are the most important requirement here.
Connect disposal routes with deletion. Link the disposal of e-waste to the evidence of data deletion (→ Deletion Evidence Log).
Relations to other categories
In the catalogue, the environment is measured and documented by AC01 Information. It sets limits for AC02 Software and AC03 Hardware, for example through energy demand and cooling, and is depleted by hardware. It restricts people, buildings and the organization and influences physical assets (AC05 Physical), for instance when a site is chosen outside flood zones. It affects financial assets, enables intellectual property such as new environmental technology and is regulated by AC09 Legal & Regulatory assets. It influences and limits the AC11 Supply Chain, affects relationships and creates demand in the market. Finally, it sets limits for AC14 Processes and is consumed by them.
Effective controls
- A.5.9 Inventory of Information and Other Associated Assets: resources and environmental data in the register, with a responsible person.
- A.5.12 Classification of Information: classify environmental and consumption data appropriately before passing it on.
- A.7.5 Protecting Against Physical and Environmental Threats: prepare sites for floods, heat and storms.
- A.7.11 Supporting Utilities: secure and monitor power, water and air conditioning.
- A.5.29 Information Security During Disruption and A.5.30 ICT Readiness for Business Continuity: be prepared for supply failures.
- A.7.14 Secure Disposal or Re-Use of Equipment and A.8.10 Information Deletion: remove data securely before disposal.
- A.5.31 Legal, Statutory, Regulatory and Contractual Requirements: know and meet environmental conditions and reporting duties.
Sources
- ISO/IEC 27005:2022, Annex A.2.2: Assets, and clause 6.4.3.2 on consequence criteria
- ISO/IEC 27001:2022/Amd 1:2024, climate change amendment to clauses 4.1 and 4.2
- ISO/IEC 27002:2022, clauses 5.9, 5.12, 5.29 to 5.31, 7.5, 7.11, 7.14 and 8.10
- BSI IT-Grundschutz Compendium: elementary threats G 0.2 to G 0.29